Materials science Books

From October 15 to 19, 1995 a Workshop on Hetero­ structureEpitaxyandDeviceswasheldatSmoleniceCastlenear Slovakia'scapital Bratislava. The intention ofthisWorkshop was toestablishandstrengthentiesbetweenscientistsoftheformerly...

At the beginning of this series of volumes on Color Chemistry, the editors pointed to a number of events that have served as stimuli for techno­ logical advances in the field, thus preventing dyestuff manufacturing from...

Carbide, Nitride and Boride Materials Synthesis and Processing is a major reference text addressing methods for the synthesis of non-oxides. Each chapter has been written by an expert practising in the subject area,...

Resin Transfer Moulding provides readers with the information needed to design, develop and manufacture high components via an RTM route and provides a framework which readers can use to place their endeavours within an...

Organic solids exhibit a wide range of electrical and related properties. They occur as crystals, glasses, polymers and thin films; they may be insulators, semiconductors, conductors or superconductors; and they may show...

An assessment of the recent achievements and relative strengths of two developing techniques for characterising surfaces at the nanometer scale: (i) local probe methods, including scanning tunnelling microscopy and its...

MICROELECTRONIC INTERCONNECTIONS AND MICROASSEMBL Y WORKSHOP 18-21 May 1996, Prague, Czech Republic Conference Organizers: George Harman, NIST (USA) and Pavel Mach (Czech Republic) Summary of the Technical Program Thirty two...

The main objective of the First International Symposium on Lubricated Transport of Viscous Materials was to bring together scientists and engineers from academia and industryto discuss current research work and exchange ideas...

Once again, just before Easter, a goodly number of people gathered to hear a series of papers on a variety of aspects of adhesion presented by authors from a number of countries. Overall they all seemed to be as well pleased as...

Turbulence modeling both addresses a fundamental problem in physics, 'the last great unsolved problem of classical physics,' and has far-reaching importance in the solution of difficult practical problems from aeronautical...

In this volume a survey of the most relevant nonlinear crack models is provided, with the purpose of analyzing the nonlinear mechanical effects occurring at the tip of macrocracks in quasi-brittle materials - such as...

One service mathematics has rendered the 'Ht moi, ...• Ii j'avait so comment en revenir, je ny _ais point aile':' human race. It has put common sense back Jules Verne where it belongs, on the topmost shelf neJll to the dusty...

The past decade has seen a rapid development in the range of techniques which are available to modify the surfaces of engineering components. This in tum has led to the emergence of the new field of surface engineering­ the...

The concept of using flexible, reelable pipe to transport liquids, gases, and vapours is not a new one. As early as the 1940s a steel braided elastomeric pipeline was developed for the Allied Forces in order to transport fuels...

Stress corrosion cracking, including hydrogen embrittlement, has probably attracted more attention in the last decade than any other single facet of the many that constitute the totality of the environment sensitive behaviour...

This book is intended for those people who have a knowledge or understanding of rubber materials and processes but who wish to update their knowledge. It should be read in conjunction with Developments in Rubber Technology-l as...

The turbine has many advantages over other prime movers for producing power. The first turbine used water as the working fluid and this principle is still used in hydro-electric power generation. The steam turbine was developed...

Crystalline or, more properly, semi-crystalline polymers continue to present major challenges and opportunities to scientists and technologists alike. On the one hand, scientific understanding of their structure and properties...

In order to make the subject manageable the term 'injection moulding' has been restricted in its use so that only those processes which rely on thermal softening of the polymeric materials have been described and discussed in...

The International Conference on Fracture Mechanics Technology Applied to Material Evaluation and Structure Design was held in Melbourne, Australia, from August 10 to 13, 1982. It was sponsored jointly by the Australian Fracture...

The papers contained herein were presented at the Second International Conference on Composite Structures (ICCS/2) held at Paisley College of Technology, Paisley, Scotland, in September 1983. The Conference was organised and...

In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus,...

Large, fast, digital computers have been widely used in engineering practice and their use has had a large impact in many fields. Polymer processing is no exception, and there is already a substantial amount of literature...

This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges­ tion...

The impact of Materials Science in our environment has probably never been as massive and decisive as it is today. In every aspect of our lives, progress has never been so dependent on the techniques involved in producing ever...

The first NATO Advanced Study Institute on Nitrogen Ceramics held in 1976 at Canterbury came at a particularly significant moment in the development of this subject. The five-year period, 1971-75, had been an especially...

Optical measurement techniques have been stimulated in recent years by the advent of lasers and also by modern electro-optical devices. Despite the considerable research and developments in this field, these techniques are not...

This volume includes reviews on tackling polymer characterisation problems and on developing specific characterisation techniques. The first two chapters and the last chapter describe progress in providing character­ isation...

In the field of plastics technology, the process of extrusion is widespread and important. It is employed in the compounding and pelletising of plastics materials, in their conversion into products (such as profiles, pipe,...

This volume contains the lectures presented at the NATO Advanced Study Institute that took place at the University of Delaware, Newark, Delaware, July 18-27, 1982. The purpose of this Institute was to provide an international...

Modulated Structure Materials arise in two basic ways. One is through the natural tendency that certain materials have to develoo stable modulations. Tynical examples of this catenory are the lonn oeriod superlattices, the...

Over the last few years there has been increasing need for systematic and straregically designed experiments of surface morphology evolution resulting form ion bombardment induced sputtering. Although there is an impressive...